GEW Series
GEW 202 spring brackets / U-Bolts
Semi-automatic Chamfering, Peeling and Thread rolling
The Akea GEW 202 is a part of the Akea GEW series but modified for also processing U-bolts / Spring brackets. The machine is like the other machines in the GEW series a productive semi-automated metal processing machine with rotating tools.
GEW Series
GEW 202 spring brackets / U-Bolts
The Akea GEW 202 is a part of the Akea GEW series but modified for also processing U-bolts / Spring brackets. The machine is like the other machines in the GEW series a productive semi-automated metal processing machine with rotating tools.
Configuration
- Spindles : 1 to 3
- Vices : 1 to 2
- Thread rolling : M12 up to M56
- Part length : 100mm to 500mm
- Output : 30 to 150 parts/hour
Process tools
- Chamfering
- Peeling
- Thread Rolling
- End machining
BENEFITS
- Higher throughput
- Consistent quality
- Fast changeovers
- Process flexibility
- Configurable capacity
- Operator-friendly
PRODUCTIVITY
Configuration
→ Spindles : 1 to 3
→ Vices : 1 to 2
→ Thread rolling : M12 up to M56
→ Part length : 100mm to 500mm
→ Output : 30 to 150 parts/hour
Process tools
→ Chamfering
→ Peeling
→ Thread Rolling
→ End machining
BENEFITS
→ Higher throughput
→ Consistent quality
→ Fast changeovers
→ Process flexibility
→ Configurable capacity
→ Operator-friendly
Functionality
Metal processing
The operator interface for the machine is very intuitive and easy to operate. Setup time for changing between different products is minimal.
The machine series is developed for chamfering, peeling and thread rolling processes on spring brackets / U-bolts, but can also be used for processing straight rebar and bar material.
The workpieces are loaded manually by an operator where after the machine automatic perform e.g. the chamfering, peeling and thread rolling operations.
The machine is configurable with number of spindles, depending on customer processing demands.
Metal processing
The operator interface for the machine is very intuitive and easy to operate. Setup time for changing between different products is minimal.
The machine series is developed for chamfering, peeling and thread rolling processes on spring brackets / U-bolts, but can also be used for processing straight rebar and bar material.
The workpieces are loaded manually by an operator where after the machine automatic perform e.g. the chamfering, peeling and thread rolling operations.
The machine is configurable with number of spindles, depending on customer processing demands.
Benefits in detail
- Higher throughput with semi-automatic flow; typical output 30–150 parts/hour (process-dependent).
- Consistent quality: servo-driven tooling and fixed-part machining reduces variation.
- Fast changeovers thanks to an intuitive operator interface and minimal setup time between products.
- Process flexibility (Chamfering, Peeling, Thread Rolling, End Machining) in one platform.
- Configurable capacity with 1–3 spindles and 1–2 vices to match cycle-time targets and budget.
- Wide thread range (M12–M56) covers common spring bracket and U-bolt sizes.
- Versatile part sizes (approx. 100–500 mm length) for different product families.
- Broader application: also processes straight rebar and bar material, not only U-bolts.
- Operator-friendly semi-automatic load with automated machining sequence reduces fatigue and training time.
- Scalable ROI: start with required spindles/fixtures; upgrade configuration as demand grows.
Benefits in detail
→ Higher throughput with semi-automatic flow; typical output 30–150 parts/hour (process-dependent).
→ Consistent quality: servo-driven tooling and fixed-part machining reduces variation.
→ Fast changeovers thanks to an intuitive operator interface and minimal setup time between products.
→ Process flexibility (Chamfering, Peeling, Thread Rolling, End Machining) in one platform.
→ Configurable capacity with 1–3 spindles and 1–2 vices to match cycle-time targets and budget.
→ Wide thread range (M12–M56) covers common spring bracket and U-bolt sizes.
→ Versatile part sizes (approx. 100–500 mm length) for different product families.
→ Broader application: also processes straight rebar and bar material, not only U-bolts.
→ Operator-friendly semi-automatic load with automated machining sequence reduces fatigue and training time.
→ Scalable ROI: start with required spindles/fixtures; upgrade configuration as demand grows.